The device is a double current wire feeder that can feed two same or different rolls of wire into the ladle at the same time.
The wire feeder device owns double sets of pinch roll and middle guide roll to support,by the upper roll with a cylinder to exert pressure.The lower roll is directly driven by electrical machine.The upper roll accurately measures the length of the feeding core wire by driving a encoder.
The transform switch on the console allows the operator to choose the double current to function at the same time or continuously.
The feeding speed is controlled by the controller,and is shown on the console.The device supervises the feeding length of each current,and it will stop automatically if the length reaches the former setting one.
In order to assemble/disassemble conveniently,the wire feeder has the ability to move forward/backward.
Device pattern:fixed,moving,and rotary
Device category:single wire,double wires,and four wires.
Device assignment:high end(S7--300),middle end(S7--200),low end (relay) |