WX-6BF喂线机（喂丝机）

    该设备是一个双流喂丝机，能够同时将两卷相同或不同的丝线喂入钢包中。喂丝机装备有双套夹送辊及中间导辊支撑。通过上辊借助于一个气缸施加压力。底辊由电机直接驱动。上辊驱动一个编码器来精确地测量出喂入芯线的长充。在控制台上的转换开关允许操作者选择两流同时或相继运行。喂丝速度由控制器来确定，并且将显示在控制台上。该装置监视每流所喂入的长度。达到预先选定的长度则喂丝机自动停止。为了便于安装/拆卸包芯线，该喂丝机具有前进/后退的移动能力。
设备型式：固定、行走、旋转等三种。
设备种类：单线、双线、四线等三种。
设备配置：高端（S7--300）、中端（S7--200）、低端（继电器），三种型式。
The device is a double current wire feeder that can feed two same or different rolls of wire into the ladle at the same time.
The wire feeder device owns double sets of pinch roll and middle guide roll to support,by the upper roll with a cylinder to exert pressure.The lower roll is directly driven by electrical machine.The upper roll accurately measures the length of the feeding core wire by driving a encoder.
The transform switch on the console allows the operator to choose the double current to function at the same time or continuously.
The feeding speed is controlled by the controller,and is shown on the console.The device supervises the feeding length of each current,and it will stop automatically if the length reaches the former setting one.
In order to assemble/disassemble conveniently,the wire feeder has the ability to move forward/backward.
Device pattern:fixed,moving,and rotary
Device category:single wire,double wires,and four wires.
Device assignment:high end(S7--300),middle end(S7--200),low end (relay)